Traxxas XRT 8S 1/6 4WD TQi RTR (Black)

Spedizione GRATUITA
Produttore:
Traxxas
Categorie:
Codice prodotto:
#TRA78086-4-BLK
Il tuo prezzo:
1.235,50 €
Disponibilità:
in magazzino 1 pz, Domani l'invio 14. 11.
Tu ricevi:
Europa15. 11.
MondoStimato 18. 11.

The Traxxas XRT fuses race-inspired design and engineering with X-Maxx® power and strength. The result is an all-new platform with sharp reflexes and unprecedented stability that is capable of exploiting the upper range of extreme 8s power and speed.

Features:
  • VXL-8s™ Waterproof Electronic Speed Control
    • Aggressive tuning for more power at any RPM
    • 8s LiPo compatible
    • Built-in cooling fan
    • Real-time telemetry via Traxxas Link
    • Machined heat sinks
    • 10-gauge silicone wire
    • Integrated protection circuits
    • LED status lights
  • Velineon® 1200XL Brushless Motor
    • “Big Block” brushless motor
    • 4-pole 1275 kV
    • 5mm output shaft
    • Oversize aluminum heatsink for improved cooling
    • Dual cooling fans
  • Up to 60+ mph with Two 4s LiPo Batteries and Included Optional Speed Gear
  • Traxxas Stability Management® (TSM)
    • Improves straight line acceleration and braking on low-traction surfaces
    • Never dulls throttle or slows the truck
    • Adjusts from off to 100% assistance from the transmitter
  • TQi™ 2.4GHz High Output Radio System
    • TQi™ 2-channel transmitter
    • Automatically stores and loads settings for up to 30 Traxxas Link-enabled models
    • Programmable multi-function knob
    • Adjustable steering and throttle percentage (dual rates)
    • Adjustable steering and throttle sensitivity (exponential)
    • Adjustable steering and throttle end points
    • High 13ms frame rate and near-zero latency for responsive control
    • 5-channel micro receiver (#6533) with fail-safe security
    • Patented waterproof receiver box with easy-access plug
  • X-Maxx® Spec 8s Drivetrain
    • Full-time shaft-driven 4-wheel drive
    • Heavy-duty steel CV driveshafts & axles
    • Splined aluminum center driveshaft
    • Fully machined aluminum stub axles
  • Transmission
    • Mod-1 steel pinion and spur gears
    • Fixed gear mesh system
    • Torque-Biasing Center Drive
  • X-Maxx Spec 8s Differentials
    • Heavy-duty sealed 4-gear design
    • Large scale steel ring and pinion gears
    • Splined outdrives attached with external thru-bolt method
    • Reinforced bulkhead and covers increase bearing support
  • Rock-Solid Motor Mounting System
    • Precise preset gear mesh adjustments
    • 4 keyed pins lock the motor in place
    • Motor retention separate from gear mesh
  • GTX Race Shocks
    • Machined aluminum threaded body
    • Extra-large bore and capacity
    • 5.2mm damper shaft
    • Lower seal cartridge includes integrated wiper seal combination
    • Height-adjustable spring retainer
    • Heavy-duty composite shock caps with pivot balls
    • Lower spring perches bolted on
  • WideMaxx® Suspension
    • Extra-wide suspension arms
      • Made from heavy-duty cold-weather composite
    • Performance-optimized geometry
    • Double-shear connections
    • High-strength steel suspension pins with retainers
    • 4mm machined pivot balls
    • Fixed high-strength camber and toe links
    • Heavy-duty steering blocks and axle carriers
    • Oversized wheel bearings
  • Low-CG Chassis Design
    • Modular chassis with interlocking bulkheads
      • Low center of gravity for improved handling
      • Flat bottom design
      • Heavy-duty interlocking skid plates
      • High-strength buttressing on shock towers
    • Dual snap-lock battery compartments
      • Protects batteries from side impacts
      • Allows secondary battery-clip security
    • Interlocking components for tight tolerances
    • Wire management for clean appearance
  • Patent-Pending Clipless Body
    • Snaps in place in just seconds
    • Secure body latches are easy to use
    • Rigid internal frame
    • Dual cold-air intakes
    • Molded body reinforcements for tear-through protection
    • Protective top skids
    • Rugged high-downforce rear wing
  • Heavy-Duty Bumpers
    • Reinforced front bumper and rear wing support
      • Absorb impact forces while retaining shape
    • Nerf bars for side impact resistance
    • Heavy-duty wheelie bar with carry handle
  • Wheels and Tires
    • 7.4" Gravix™ race tires
      • Low sidewall for sharp turn-in response
      • Thick center carcass resists ballooning at high speed
      • Lower rotational mass for faster acceleration
    • 4.0" matte black XRT race wheels
    • High-strength glue and bead design
    • Huge 24mm splined wheel hubs
  • Steering
    • Powerful 365 oz-in steering servo
    • Heavy-duty cam-style servo saver
    • Dirt evacuation channels
    • Fully waterproof
  • Sealed Ball Bearings
  • Hex hardware with Rust-Resistant Black Oxide Coating
Truck Specifications:
Length (including wing):31.41 inches (798mm)
Front Track:23.43 inches (595mm)
Rear Track:23.43 inches (595mm)
Ground Clearance:1.93 inches (49mm)
Weight:19.70 pounds (8.94kgs) - without body
21.03 pounds (9.54kgs) - with body
23.87 pounds (10.83kgs) - with body & two 4s 6700mAh LiPos
Height:10.15 inches (258mm) - ride height
12.12 inches (308mm) - full droop
Wheelbase:18.9 inches (480mm)
Shock Length (front):6.79 inches (173mm)
Shock Length (rear):6.79 inches (173mm)
Tires (Pre-Glued):7.4 x 4.0 inches (188mm x 102mm)
Wheels:4.3 x 5.7 inches (110mm x 147mm)
Speed Control:Velineon® VXL-8s
Motor (electric):Velineon® 1200XL Brushless
with heat sink and dual fan shrouds
Overall Drive Ratio:20.6:1 (20/50 motor pinion and spur gear)
Differential Type:Sealed, hardened steel bevel, limited slip
Gear Pitch (Spur and Pinion):Module 1.0
Chassis Structure/Material:Composite Nylon Tub
Brake Type:Electronic
Drive System:Shaft-driven 4WD
Steering:Bellcrank
Radio System:TQi™ 2.4GHz Transmitter with TSM® receiver™
Servo:Torque: 365oz. Speed: 0.17 sec/ 60 degrees(6.0V)
Top Speed:60+ MPH with two 4s LiPo batteries and included optional gearing
Skill Level:5
Battery Tray:186mm x 51mm x 44mm
Required Batteries:4 “AA” (transmitter) and 4-cell LiPo battery (x2)

Motor Specifications:
Type:1275 kv Sensorless Brushless
Weight:665g (23.44oz)
Length:4.32 inches (110mm)
Diameter:1.88 inches (48mm)
Connector Type:Traxxas 6.5mm Bullet Connectors

ESC Specifications:
Input Voltage:8s LiPo (Max 33.6 Volts)
Case Size:2.23in (58mm) / 2.83in (72mm) / 1.81in (46mm)
Weight:215.5g (7.60oz)
BEC Voltage:6.0 V
BEC Current Continuous:10 A
BEC Current Peak:20 A
Motor Connectors:Traxxas 6.5mm Bullet Connectors
Battery Connectors:Traxxas High-Current Connectors
Power Wire:10-gauge Maxx Cable
Ports:RX Input, Auxiliary Fan, Traxxas Accessory Port

Includes:
  • XRT, Ready-To-Race® model with Traxxas Big Block™ brushless motor
  • VXL-8s waterproof electronic speed control with integrated telemetry
  • Quick Start Guide
  • TQi™ 2.4GHz radio system
  • High quality maintenance tools
  • Optional speed gears
Required to Complete:
  • LiPo Batteries -Traxxas recommends dual 4-Cell, 6700 mAh Power Cell LiPo batteries (part #2890X) or the Dual 4s Completer Pack (Part #2997).
  • LiPo Balance Charger with iD™ - Traxxas EZ-Peak® Live 4s-capable charger is recommended for easy and fast charging performance (model #2971).
  • AA Alkaline Batteries - Four AA alkaline batteries for the transmitter.
Video:

Loading...